Skip to content
All TradeWeb & SEOGet started

Notes

My Marketing Worked. I Wasn't Ready for What Came Next.

A former asphalt business owner on what happened when his Google Ads worked, and four things tradies should sort before spending more on marketing.

Nathan compacting a new asphalt driveway, with hand-drawn orange phone calls and enquiry messages piling up in the sky above him

There was a point in running my asphalt business when I stopped wanting to answer the phone.

That’s a strange place to end up when you’ve spent so much time and money trying to get it to ring.

I’d built my website, started running Google Ads, and the enquiries were coming in. But I was falling behind on quotes, missing calls and taking too long to get back to people. I was losing good jobs simply because I couldn’t keep up.

I think of it as failing from success. The marketing was working. I just hadn’t planned for the workload that came with it.

Hiring more help sounds like the obvious answer, but it’s rarely quick. In my trade, as far as I know, there’s no TAFE course that teaches you to lay asphalt properly. You learn from the bloke next to you on site, and a lot of it only comes with experience. Finding good people takes time, and once you find them, you need enough work to keep paying their wages when things go quiet. I’ve spoken to plenty of tradies since, and finding and keeping good staff comes up again and again, whatever the trade.

A Coast Pave crew preparing a gravel driveway base on a residential job on the Central Coast
Preparing a driveway base on a Coast Pave job. Good people take time to find.

One month you’re flat out and turning work away. The next, you’re wondering where the next job is coming from.

I was stressed when I was working and carrying that stress when I wasn’t. Eventually, I started losing the desire to work at all.

Being busy wasn’t the same as doing well

My bread-and-butter work was small to medium residential driveways, crossovers, asphalt repairs and commercial pothole repairs. Jobs we could usually finish in a day or two. I understood that work, knew how to deliver it and could make a good profit doing it.

Nathan compacting a fresh asphalt patch repair with a plate compactor
Bread-and-butter work: compacting an asphalt patch repair.

As the business grew, bigger jobs started coming my way, some of them through other contractors. The price tags looked good, and I didn’t always weigh up what came with them.

One council job in Terrigal taught me that the hard way. Another civil contractor subcontracted me for the asphalt. The job was worth $34,000, and we allowed four days. It was bigger than I’d normally take on, and I nearly said no. But we’d done a couple of similar jobs together that went well. He knew the council people overseeing it and said he’d be on site every day. I was confident it would run smoothly.

The week of the job, he got sick and couldn’t be there. On the day we laid the asphalt, I was sick too. We were short-staffed on a job that was already outside my comfort zone, for a client that checks everything closely.

I ended up going back, ripping up about 75% of it and laying it again. I’d priced that job to be done once. And while I’d received the first half of the payment, the remaining $17,000 took around six weeks to come through. Meanwhile, wages and bills kept coming. I fell behind, and it put a strain on my relationship with the other contractor.

A job can look profitable on paper and still put you behind.

The lesson wasn’t that big jobs are bad. I’d taken on work that only went well if everything went right. My bread-and-butter jobs could handle a bad day. That one couldn’t. And while I was tied up with it, I was missing enquiries for the work that already suited my business.

You can control what the marketing brings in

When I started marketing Coast Pave, I noticed that many of the established asphalt businesses on the Central Coast had grown into larger operations, with bigger crews and the capacity for big projects. I saw an opportunity in the smaller jobs.

So I built my marketing around them. My Google Ads targeted driveways, crossovers, repairs and pothole work. I backed that up with blog posts, photos of finished jobs and my Google Business Profile.

A worker standing beside a prepared road base for a driveway crossover outside a new garage
A driveway crossover ready for asphalt, the kind of job I built my marketing around.

It worked. The enquiries coming in were for the jobs I wanted. Eventually, we had enough work booked to keep us busy for months, so I cut my Google Ads spend by half and then paused the campaigns. There was no point paying for more enquiries when I already had plenty to follow up and complete.

That changed how I think about marketing. You don’t necessarily need more enquiries. You need more of the right ones, at a pace you can handle. What counts as the right enquiry is different for every business. A painter might want full repaints rather than touch-ups. An electrician might prefer renovation work over small callouts.

With Google Ads, you choose which services and areas to target, check which searches bring people in and exclude the ones that aren’t relevant. You can also adjust your spend as your workload changes. That doesn’t mean switching off whenever you’re busy. You might be booked for three weeks but still need work for the month after.

Weather makes that harder to judge. In asphalt, a wet week doesn’t just cost you those days. It pushes back every job behind them, and then everyone is calling at once to ask when you’re coming.

A free quote still costs you

Every enquiry takes work before it brings in any money. You talk through the job, drive out to look at it, prepare the quote and follow up. Sometimes you still don’t get it.

A freshly laid asphalt road shoulder along a residential street, with traffic cones along the edge
Every site visit is time on the road before any money comes in.

For me, the drive could take half an hour to an hour. The quote took another hour, and that hour usually came at night, at the kitchen table, after a full day on the tools. The worst was driving out, talking through the job and hearing, “That’s too expensive.” We could have had that conversation before I left. Other times I’d send the quote and never hear back.

I used to think I had to meet every customer before talking price. With experience, I realised plenty of people were happy to get a rough figure first. So on straightforward jobs, I started giving price ranges before visiting, with the final price confirmed on site. Often the response was simple: “All right, that works. What happens next?” The visits became far more useful for both of us.

Answering enquiries without living on the phone

I wasn’t sitting at a desk. I was on the tools, and I was also the one quoting, invoicing and chasing payments. Every call meant stopping work to have the same first conversation again: where’s the job, how big is it, is there existing asphalt?

Towards the end of running Coast Pave, I set up automated text replies that sent people to a form where they could add their job details and photos. It saved me a lot of time, helped me decide which jobs were worth a visit and filtered out spam. Just as importantly, the customer got a reply telling them I was on a job, what I needed from them and when they’d hear back. They had a next step instead of an unanswered call.

The part I hadn’t solved was quoting. My inbox was a mess, and I was still building every estimate by hand in Xero. Every trade has its own pricing variables. Mine were square metres, depth, excavation, materials, ground conditions, access and whether council was involved. The better the information you collect at the start, the faster and more accurate the quote.

I moved on from the business before I’d finished building that process, because I wanted to use what I’d learned, on the tools and in marketing, to help other tradies reach their own goals.

Put the process in place before you need it

Once you’re overloaded, fixing the process becomes another job on a list you’re already behind on. If I could go back, I’d sort these four things before turning up the marketing:

  1. Know the jobs and area you want. Your bread-and-butter work, and where you’re happy to travel for it.
  2. Ask for details and photos up front. A simple form or auto-reply text saves you a phone call and a wasted drive.
  3. Give a rough price where you can. On straightforward jobs, a range before the visit saves you both time.
  4. Set a reply time you can actually meet. Then keep time aside each week to quote and follow up.

Why this shapes how I work now

Nathan Harmond standing on asphalt with his arms crossed, wearing a Coast Pave Asphalt work shirt
Nathan Harmond: formerly Coast Pave Asphalt, now All Trade Web and SEO.

Running Coast Pave taught me how to build a website, get enquiries through Google and find the part of the market that suited my business. It also taught me that more enquiries don’t automatically make running a business easier. Someone still has to answer the phone, look at the job, write the quote and do the work.

So at All Trade Web and SEO, I start with how your business runs. What jobs do you want more of? Where do you want to work? What happens when someone gets in touch? Those answers shape your website, SEO, Google Ads and Google Business Profile. The aim isn’t to make your phone ring as often as possible. It’s to bring in work that suits your business, with a process that lets you make the most of it.

If this sounds familiar, call or text me on 0410 295 780. Tell me what work you want more of and where you’re getting stuck.

P.S. I’m also developing tools to help tradies organise enquiries and spend less time preparing quotes. If you’d like to help test them, mention it when you get in touch.

Want this done for your business?

Everything you've just read, I do myself.

See services and prices